
Description
Range Of Performance
Flow rate up to 120 l/min (7.2 m3/h)
Head up to 105 m
Limits Of Use
Liquid temperature up to+40°C
Maximum sand content 50 g/m3
Submersio depth up to 20 m
Installation and Use
Their high efficiency and reliability make them suitable for pumping clean water in domestic, civil and agricultural applications, for distributing water in combination with pressure sets, for distributing water in combination with pressure sets, for irrigating gardens, boosting pressure, etc.
Construction Characteristics
Outer case and motor support : stainless steel AISI 304
Impeller and diffusers : tchnopolymer
Diaphragms : Stainless steel AISI 304, complete with anti-wear rings
Motor Shaft : Stainless steel EN 10088-3-1.4104
Double seal : Mechanical seal silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running
Screws and filter : stainless steel AISI 304
Motor : asynchronous for continuous duty
Sumon 2/4 : single-phase 220÷240 V – 50 Hz with thermal overload protector built manual into windings below 1.5 kw. The 1.8 kw motor has an external overload protector (wih manual reset) incorporated into the control box.
SUMO 2/4 : three-phase 380÷415V – 50 Hz
Insulation : class F
Protection : IP 68