As class 0.6 test gauge series, the model 610.20 and 630.20 capsule pressure gauges are suitable for precision measurements in laboratories. They are based upon the proven capsule measuring system. On pressurisation, the expansion of the capsule element, proportional to the incident pressure, is transmitted to the movement and indicated.
The modular design enables a multitude of combinations of case materials, process connections, nominal sizes and scale ranges. Due to this high varience, the instrument is suitable for use in a wide range of applications within industry.
For mounting in control panels, the capsule pressure gages can, depending on the process connection, be fitted with a surface mounting flange or with a triangular bezel and mounting bracket.
- Precision measurement in laboratories
- High-accuracy pressure measurement
- For gaseous, dry and on-aggressive media
- Model 630.20 also for aggressive media
- Zero point setting in front
- Special connection location on request
- Low scale ranges from 0…10 mbar
Nominal size in mm
0 … 10 mbar to 0 … 600 mbar
or all other equivalent vacuum or combined pressure and vacuum ranges
Steady: Full scale value
Fluctuating: 0.9 x full scale value
Ambient: -20 … +60 °C
Medium: ≤ 60 °C
When the temperature of the measuring system deviates from the reference
temperature (+20 °C): max. ±0.6 %/10 K of full scale value
Ingress protection per IEC/EN 60529
Model 610.20: Copper alloy
Model 630.20: Stainless steel
Lower mount or lower back mount
G ½ B (male), SW 22