Pompa Celup Pedrollo Air Bersih Stainless VL (SUS 304)
Range Of Performance
Flow rate up to 12 120 l/min (7.2 m3/h)
Head up to +40°C
Installation And Use
They are recommended for pumping clean water and liquid that are chemically non aggresive to the materials from which the pump is made.
Their realibility and quiet running make them suitable for domestic and applications, because the pump is fully submersible with the motor cooled by the pumped liquid, it can be used safety in wet environments and in spaces with insufficient ventilation.
Outer case and motor support : Stainless steel AISI 304 case with threaded ports ISO 228-1
Impellers and diffusers : technopolymer
Diaphragms : stainless steel AISI 304, complete with anti-wear rings
Motor shaft : Stainless steel EN 10088-3-1.4104
Double seal : Mechanical seal silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
Screws : Stainless steel AISI 304.
Motor : electric, asyinchronous for continuous duty
VLM 4 : single-phase 220÷240 V – 50 Hz with thermal overload protector built into windings below 1.5 kW. The 1.8 kw motor has an external overload protector (with manual reset) incorporated into the control box.
VL 4 : three-phase 380÷415 V – 50 Hz
Insulation : Class F
Protection : IP 68
Standard Features :
VLM 2 (single-phase) 2 m power cable type “H07 RN-F” with removable connector control box with capacitor and schuko plug
VL 2 (three-phase) 2 m power cable type “H07 RN – F” removable connector
VLM 4 (Single-phase) 2 mt power cable typw “H07 RN-F” with removable connector control box with capacitor and schuko plug.
VL 4 (three-phase) 2 mt power cable “H07 RN-F” with removable connector.