Description :
Pompa Celup Pedrollo Air Bersih/ Drainase RXm2 (AUTO)
Range Of Performance
Flow rate up to 220 /min (13.2 m3/h)
Head up to 10 m
Limits Of USE
Depth up to 10 m
Liquid temperature up to +50°C
Liquid temperature up to + 60°C for internittent duty
Liquid temperature up to + 90°C for intermittent duty maximum 3 minutes
Passage of solid bodies up to ø 10 mm
Drainage level :
14 mm from the bottom for RX 2
Installation And Use
RX pumps are suitable for draining clear water without abrasive particles.
The construction guarantees simple and operation due to the complete cooling of the motor by the pumped water and the double seal design. They are recommended for fixed installations, emergency draining of small flooded areas (basement rooms, cellars, garages), for disposal of dirty water used in the home by washing machines and diswashers and for draining collection traps.
Construction Characteristics
Delivery Body : Stainless steel AISI 304, with treaded port ISO 228/1.
Suction Grid : Stainless steel AISI 304
Impeller : Stainless steel AISI 304
Motor shaft : Stainless steel EN 10088-3-1.4104
Double seal : Mechanical seal ceramic-graphite-NBR, with oil barrier chamber and inner lip seal to protected the seal in the event of dry running.
Motor : Submersible asyinchronous single phase for continuous duty
RXM : single-phase 220÷240 V – 50 Hz with capacitor and thermal overload protector.
RX : three-phase 380÷415 V – 50 Hz
Insulation : class F
Protection : IP 68
Registered Model
Standard Features :
RXm (single-phase) float switch. Neoprene power cable “H05 RN-F” length 5 metres with schuko plug
RX (three-hase) neoprene power cable “H05 RN-F” length 5 metres.